10 Pack Replacement Yellow SPOUT CAPS Top Hat Style fits # 900302 900092 Blitz Gas Can Spout Cap fits self Venting Gas can Aftermarket SPOUTS NOT Included

#ad
JSP Manufacturing #ad - Fits self-venting gas can spouts. Just like the original whereas you can use it to hide/store your existing spout inside the can by using your existing blitz screw cap collar to tighten closed. These caps only fit on blitz black self-venting spouts with the part numbers 900092 900094 900302, the part number can be located on your existing spout.

Easy to install on your fuel, just line up the arrows, Kerosene, push onto spout, Diesel, Gas and Water, then twist to lock. Blitz made several other types of spouts that these caps simply do not fit on. Aftermarket spouts noT INCLUDED. We are the manufacturer and our caps are 100% made in the USA! Note: Spouts are not included!!! & Caliper not included.

10 Pack Replacement Yellow SPOUT CAPS Top Hat Style fits # 900302 900092 Blitz Gas Can Spout Cap fits self Venting Gas can Aftermarket SPOUTS NOT Included #ad - Blitz yellow spout caps - Spout Cap to keep dirt and debris out of your can. Be sure to see if your spout matches the picture as these Caps only fit on that style Spout not included. Jspmanufacturing blitz Yellow Spout Cap 10PACK. 10 pack tight fit, excellent replacement Spout Cap. Made in the usa" aftermarket, never Used, Brand New, No Retail Packaging.

900302 900092 900094. Please note: these may fit on a few other containers spouts like Kolpin & RotopaX but only if they used that specific style of Self-venting Black spout mentioned above.

#ad



20 YELLOW Fuel Gas Can Jug Vents/Cap Replacement Wedco Rotopax Gott Septer Anchor Blitz

#ad
Tri-Sure MYC-Y-VENT20 #ad - Fits blitz, chilton, rotopax, eagle, Essence, Scepter, Midwest, kolpin, and many more gas cans. Allows faster and smoother flowing fuel/water/diesel/kerosene! Fits plastic and/or Metal Fuel Jugs/Cans! Drill the final hole with a 31/64", 1/2" is close enough, boring bit. Choose an area where the vent will be above the "full" line.

Yellow Vents. This listing is for twenty 20 gas can vents! • pre-drill with a 1/16" drill bit a small hole on top of the can, opposite side of the spout. You are now ready to vent. Free shipping to the lower 48 states + alaska, guam & pr - ships in 24 hours or less and will arrive within 2 to 5 days, Hawaii, depending on your location** We will ship international - Buyer pays all shipping charges! Twenty 20 mr.

20 YELLOW Fuel Gas Can Jug Vents/Cap Replacement Wedco Rotopax Gott Septer Anchor Blitz #ad - Be gentle when drilling, and check can for any debris! Now that you have your 1/2" hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. Made in the USA by Tri-Sure.

#ad



Super Easy to Install on Gas Can for a Faster Smoother Pour GALLON FUEL DIESEL KEROSENE JUG BLITZ MIDWEST SCEPTER WEDCO BRIGGS & STRATTON - 10-Pack New Yellow Air Breather VENT CAPS with Retaining Lip

#ad
Gas Spouts Plus #ad - Use vents for fuel, diesel, gas, kerosene, Water or anything that you need a smoother faster flow & very easy to install.10 new universal Yellow Air Breather Vent Caps. Designed with retaining Lip - to "keep it in the can man". Easy install, drill and bit required. Every order comes with a Helpful Hints Installation card.

Ask me if you would like a mixture of other colors Black, Red & White, as some people like to color code their cans. Made in the usa" 10-pack genuine new yellow vent caps with RETAINING LIP to prevent from popping out of your can. Yellow Vents. Fits blitz, chilton, scepter, kolpin, eagle, Essence, Rotopax, Midwest, and many more gas cans.

Super Easy to Install on Gas Can for a Faster Smoother Pour GALLON FUEL DIESEL KEROSENE JUG BLITZ MIDWEST SCEPTER WEDCO BRIGGS & STRATTON - 10-Pack New Yellow Air Breather VENT CAPS with Retaining Lip #ad - Allows faster and smoother flowing fuel/water/diesel/kerosene! We suggest you drill a smaller hole to start with and then use the 1/2" drill bit. Fits plastic and/or Metal Fuel Jugs/Cans! Note: drill is required to install vents, you'll need a 1/2" hole at the back of your plastic can above the fill line, then gently pop it in with a rubber mallet.

The vent cap needs to sit in tight to give a good leak proof seal. Twenty 20 mr. Be sure to drill a straight clean hole, don't swagger side to side with the bit so you won't make a bigger hole than you need.

#ad



JSP Manufacturing 20 Yellow Fuel Gas Can Jug Vent Cap Compatible Chilton Briggs Rotopax Gott Anchor

#ad
JSP Manufacturing GV-Big-YELLOW-20-FBA #ad - Fits plastic and/or Metal Fuel Jugs/Cans! Made in the USA by Tri-Sure. 10 new universal Yellow Air Breather Vent Caps. Designed with retaining Lip - to "keep it in the can man". Easy install, drill and bit required. Every order comes with a Helpful Hints Installation card. Compatible with blitz, midwest, essence, Scepter, briggs & stratton, eagle, No Spill, Wedco and any other Plastic Fuel Cans.

Vent caps are installed onto any non vented Plastic Fuel Can to allow leak free fast flowing fuel. Yellow Vents. Twenty 20 mr. Browse our other items to save money with larger orders. Fits blitz, scepter, eagle, kolpin, Rotopax, chilton, Essence, Midwest, and many more gas cans. Allows faster and smoother flowing fuel/water/diesel/kerosene!

JSP Manufacturing 20 Yellow Fuel Gas Can Jug Vent Cap Compatible Chilton Briggs Rotopax Gott Anchor #ad - You will have to drill a hole into the can, 31/64" one size below 1/2"then push the vent into the hole. These caps can be installed on any fuel can in order to provide a vent and allow faster flowing fuel. Universal air vent- yellow compatible with blitz, midwest, wedco and any other plastic fuel cans vent caps are installed onto any non vented Plastic Fuel Can to allow leak free fast flowing fuel It will fit Plastic and Metal Fuel Jugs You will have to drill a 31/64" one size below 1/2" hole into the can, Eagle, No Spill, Essence, Scepter, Briggs & Stratton, then push the vent into the hole Please look at our other items for on Amazon for wholesale pricing.

You will have to drill a 31/64" hole into the can, then push the vent into the hole. Free shipping if you need more see our wholesale pricing below it will fit plastic and Metal Fuel Jugs such as Blitz, Sears Craftsman, Rotopax, Eagle, Scepter, Essence, Rubbermaid, Briggs & Stratton, Wedco, Midwest, Chilton, Gott, Anchor and Koplin.

#ad



4 - Mr. Yellow Cap Fuel Gas Can Jug Spout Nozzles, Rings, Caps & Vents, replaces Blitz 900302 900092 900094 Old Style - Please Read Description Thoroughly Before Ordering! Thank You

#ad
Mr. Yellow Cap #ad - If you have the blitz can with a flex clear spout, these will not work as the ring has a different size and thread. Easy to install and use for fuel, Kerosene, Diesel, Gas and Water! Gas cans are not included with this listing. Free shipping to the lower 48 states + alaska, depending on your location** we will ship international, Hawaii, Guam & PR - Ships in 24 hours or less and will arrive within 2 to 5 days, buyer pays all shipping costs! Vent installation instructions will be provided on the back of the packing slip! Twenty 20 mr.

Designed to fit the Blitz fuel containers that came with the hard black plastic spout only. 10 new universal Yellow Air Breather Vent Caps. Designed with retaining Lip - to "keep it in the can man". Easy install, drill and bit required. Every order comes with a Helpful Hints Installation card. Compatible with blitz, scepter, eagle, No Spill, Midwest, Essence, briggs & stratton, Wedco and any other Plastic Fuel Cans.

4 - Mr. Yellow Cap Fuel Gas Can Jug Spout Nozzles, Rings, Caps & Vents, replaces Blitz 900302 900092 900094 Old Style - Please Read Description Thoroughly Before Ordering! Thank You #ad - Vent caps are installed onto any non vented Plastic Fuel Can to allow leak free fast flowing fuel. Fits plastic and/or Metal Fuel Jugs/Cans! If you have the blitz can with a flex clear spout, rotopax, but "may" also fit Kolpin, these will not work as the ring is a different OD size and thread, Scepter and others if the spout numbers are the same as Blitz.

Made in the USA.

#ad



10 YELLOW Fuel Gas Can Jug Vents/Cap Replacement Wedco Rotopax Gott Septer Anchor Blitz

#ad
Tri-Sure MYC-Y-VENT10 #ad - Drill the final hole with a 31/64", 1/2" is close enough, boring bit. Yellow Vents. Four 4 - blitz spouts / nozzles / Rings, Vents & Caps each! It will fit Plastic and Metal Fuel Jugs. Ten 10 mr. Fits blitz, kolpin, essence, Rotopax, Eagle, chilton, Midwest, scepter, and many more gas cans. Allows faster and smoother flowing fuel/water/diesel/kerosene!

This listing is for ten 10 gas can vents! • pre-drill with a 1/16" drill bit a small hole on top of the can, opposite side of the spout. Yellow Vents. Made in the USA by Tri-Sure. If you have the blitz can with a flex clear spout, but "may" also fit Kolpin, Rotopax, these will not work as the ring is a different OD size and thread, Scepter and others if the spout numbers are the same as Blitz.

10 YELLOW Fuel Gas Can Jug Vents/Cap Replacement Wedco Rotopax Gott Septer Anchor Blitz #ad - Made in the USA. Be gentle when drilling, and check can for any debris! Now that you have your 1/2" hole, install the vent by pushing firmly to seat or by tapping gently with a hammer. Free shipping to the lower 48 states + alaska, guam & pr - ships in 24 hours or less and will arrive within 2 to 5 days, Hawaii, depending on your location** We will ship international - Buyer pays all shipping charges! Twenty 20 mr.

Fits plastic and/or Metal Fuel Jugs/Cans! . 10 new universal Yellow Air Breather Vent Caps.

#ad



3 SCEPTER SPOUT KITS #03647 Gas Can Parts 4 PCS SPOUTS/SCREW CAP COLLAR/STOPPER/REAR VENT.Kit works on MIDWEST,AMERI-CAN,PLASTIC EAGLE PG5 & KP SERIES,IGLOO,UNISTREAM,MOELLER FUEL DIESEL KEROSENE JUGS

#ad
Scepter #ad - 10 new universal Yellow Air Breather Vent Caps. Designed with retaining Lip - to "keep it in the can man". Easy install, drill and bit required. Every order comes with a Helpful Hints Installation card. Compatible with blitz, midwest, briggs & stratton, Scepter, eagle, Essence, No Spill, Wedco and any other Plastic Fuel Cans.

Vent caps are installed onto any non vented Plastic Fuel Can to allow leak free fast flowing fuel. Ten 10 mr. Made in the USA by Tri-Sure. Scepter nozzle kit contains the spout, screw cap collar, the stopper and the rear vent cap. Designed to fit the blitz fuel containers that came with the hard black plastic spout only.

3 SCEPTER SPOUT KITS #03647 Gas Can Parts 4 PCS SPOUTS/SCREW CAP COLLAR/STOPPER/REAR VENT.Kit works on MIDWEST,AMERI-CAN,PLASTIC EAGLE PG5 & KP SERIES,IGLOO,UNISTREAM,MOELLER FUEL DIESEL KEROSENE JUGS #ad - Fits plastic and/or Metal Fuel Jugs/Cans! You will have to drill a 31/64" hole into the can, then push the vent into the hole. Made in the USA by Tri-Sure. Twenty 20 mr. Yellow Vents. Fits blitz, rotopax, midwest, kolpin, Essence, eagle, chilton, Scepter, and many more gas cans. Allows faster and smoother flowing fuel/water/diesel/kerosene!

If you have the blitz can with a flex clear spout, rotopax, but "may" also fit Kolpin, these will not work as the ring is a different OD size and thread, Scepter and others if the spout numbers are the same as Blitz.

#ad



5 Yellow Fuel Gas Can Jug Vent Cap

#ad
JSP Manufacturing GV-Big-YELLOW-5-FBA #ad - If you have the blitz can with a flex clear spout, rotopax, but "may" also fit Kolpin, these will not work as the ring is a different OD size and thread, Scepter and others if the spout numbers are the same as Blitz. Made in the USA. All orders shipped the same day! These caps can be installed on any fuel can in order to provide a vent and allow faster flowing fuel.

You will have to drill a hole into the can, 31/64" one size below 1/2"then push the vent into the hole. Free shipping if you need more see our wholesale pricing below it will fit plastic and Metal Fuel Jugs such as Blitz, Chilton, Gott, Rotopax, Briggs & Stratton, Sears Craftsman, Wedco, Rubbermaid, Eagle, Scepter, Essence, Midwest, Anchor and Koplin.

5 Yellow Fuel Gas Can Jug Vent Cap #ad - Universal air vent- yellow compatible with blitz, midwest, eagle, no spill, essence, wedco and any other plastic fuel cans vent caps are installed onto any non vented Plastic Fuel Can to allow leak free fast flowing fuel It will fit Plastic and Metal Fuel Jugs You will have to drill a 31/64" one size below 1/2" hole into the can, Briggs & Stratton, Scepter, then push the vent into the hole Please look at our other items for on Amazon for wholesale pricing.

Yellow Vents. Four 4 - blitz spouts / nozzles / Rings, Vents & Caps each! Twenty 20 mr. To find wholesale pricing Click on the link above that says by JSP Manufacturing right above price. It will fit Plastic and Metal Fuel Jugs.

#ad



Solid Base Replacement Gas Tank Cap Coarse Thread - EZ-Pour Gas Can Cap

#ad
EZ-Pour B4 #ad - Dependable construction Means This Cap Won't Break. Gas can replacements caps from EZ-POUR are a great way to update your old cans. Twenty 20 mr. Finely made cap For Transportation Or Storage. If you have the blitz can with a flex clear spout, rotopax, these will not work as the ring is a different OD size and thread, but "may" also fit Kolpin, Scepter and others if the spout numbers are the same as Blitz.

Made in the USA. Update your old can today with the Ez-POUR solid base cap. New and improved now with retaining lip to hold the vent in place after installation MADE IN THE USA. Fits blitz, rotopax, eagle, kolpin, Essence, Midwest, Scepter, chilton, and many more gas cans. Allows faster and smoother flowing fuel/water/diesel/kerosene!

Solid Base Replacement Gas Tank Cap Coarse Thread - EZ-Pour Gas Can Cap #ad - Ten 10 mr. Made in the USA by Tri-Sure. All orders shipped the same day! Fits plastic and/or Metal Fuel Jugs/Cans! The cap is coarse thread and typically fits Blitz, Midwest, and Scepter cans. This cap is dependably made and will hold up to years of activity. Fits blitz, midwest, scepter, chilton, Kolpin, Rotopax, essence, Eagle, and many more gas cans.

#ad



2 - Please Read Description Thoroughly Before Ordering! Thank You - Mr. Yellow Cap Fuel Gas Can Jug Spouts Nozzles, Rings & Caps, replaces Blitz 900302 900092 900094 Old Style

#ad
Mr. Yellow Cap #ad - Fits plastic and/or Metal Fuel Jugs/Cans! Four 4 - blitz spouts / nozzles / Rings, Vents & Caps each! These spouts only fit on blitz self-venting spout #'s 900092 900094 900302, part numbers can be found on your spout. Designed to fit the blitz fuel containers that came with the hard black plastic spout only.

Dependable construction Means This Cap Won't Break. If you have the blitz can with a flex clear spout, rotopax, these will not work as the ring is a different OD size and thread, but "may" also fit Kolpin, Scepter and others if the spout numbers are the same as Blitz. Made in the USA. Two 2 - blitz spouts / Nozzles / Rings & 2 Caps.

2 - Please Read Description Thoroughly Before Ordering! Thank You - Mr. Yellow Cap Fuel Gas Can Jug Spouts Nozzles, Rings & Caps, replaces Blitz 900302 900092 900094 Old Style #ad - Ten 10 mr. Aftermarket, brand New, Never Used and No Retail Packaging. Yellow cap Is Coarse Thread. Fits blitz, chilton, midwest, Rotopax, Scepter, kolpin, Essence, eagle, and many more gas cans. Allows faster and smoother flowing fuel/water/diesel/kerosene!10 new universal Yellow Air Breather Vent Caps. Designed with retaining Lip - to "keep it in the can man".

Easy install, drill and bit required.

#ad



JSP Manufacturing Pick a Pack Yellow Fuel Gas Can Vent Cap Chilton Briggs Rotopax Gott Anchor Multipack Pricing 10

#ad
JSP Manufacturing GV-Big-YELLOW-10-FBA #ad - You will have to drill a 31/64" hole into the can, then push the vent into the hole. 10 new universal Yellow Air Breather Vent Caps. Designed with retaining Lip - to "keep it in the can man". Easy install, drill and bit required. Every order comes with a Helpful Hints Installation card. Compatible with blitz, no spill, briggs & stratton, Scepter, eagle, Midwest, Essence, Wedco and any other Plastic Fuel Cans.

Vent caps are installed onto any non vented Plastic Fuel Can to allow leak free fast flowing fuel. Color: yellow this listing is for Multi Pack- Pick a Pack Gas Can Vent. These caps can be installed on any fuel can in order to provide a vent and allow faster flowing fuel. Made in the USA by Tri-Sure. Yellow Vents.

JSP Manufacturing Pick a Pack Yellow Fuel Gas Can Vent Cap Chilton Briggs Rotopax Gott Anchor Multipack Pricing 10 #ad - Dependable construction Means This Cap Won't Break. All orders shipped the same day! Twenty 20 mr. New and improved now with retaining lip to hold the vent in place after installation MADE IN THE USA. It will fit Plastic and Metal Fuel Jugs. Universal air vent- yellow compatible with blitz, eagle, midwest, no spill, wedco and any other plastic fuel cans vent caps are installed onto any non vented Plastic Fuel Can to allow leak free fast flowing fuel It will fit Plastic and Metal Fuel Jugs You will have to drill a 31/64" one size below 1/2" hole into the can, Scepter, Briggs & Stratton, Essence, then push the vent into the hole Please select Package Quantity for wholesale pricing.

#ad