Ac - casting alloy pewter An excellent casting pewter that contains approximately 92% Tin, 7. 75% antimony and. 25% copper. 92% tin, 7. 75% antimony and. 25% copper. 1 pound. This is consistent with old fashion English pewter Britannia 8 International standard for lead free pewter. Each ingot weighs about 1 pound and measures approximately 3/4" x 1-1/2" x 4".
.
Trial Unit - Mold Max 60 High Heat Resistant Silicone Mold Rubber
Please note: thi-vex® silicone thickener is NOT recommended for use with Mold Max® 60 Pot life is 40 minutes and cure time is 24 hours. Important; you must weigh part a & b components using a gram scale to be successful with Mold Max® 60 High heat resistance Tin Silicone Rubber. Heat resistance is 565F.
Mold max® 60 is a shore 60a tin catalyzed silicone rubber formulated for applications requiring high heat resistance up to 560°F/294°C.
LEE PRECISION Lead Ladle
.
Lyman Big Dipper Casting Furnace
Econimical furnace with 10 lb capacity. This furnace features a 10 lb. Pot life is 40 minutes and cure time is 24 hours. Capacity, easy on-off temperature dial, fast heat-up time, thermostat control to +/- 10 degrees, compact non-tip design and wide mouth for easy ladling. Features: - Capacity: 10 lb. Handy for ski-mming and stirring metal.
Made in USA. Heat controls to plus or minus 10 degrees. Pot for blending alloys and casting bullets. Parts a & b are mixed 100A & 3B by weight. Compact size for easy ladeling. Designed specifically for casting metals.
LEE PRECISION 90021 Melter Grey
Econimical furnace with 10 lb capacity. Easily handles 4-cavity molds. Same infinite heat Control as used on the Product Pot. This lee precision Precision Melter includes infinite heat control for the serious shooter. Designed specifically for casting metals. Works Quickly and Efficiently. Heavy aliminum construction.
Handy for ski-mming and stirring metal. Parts a & b are mixed 100A & 3B by weight.
10 Lb Petrobond Casting Sand Gold Silver Copper Jewelry Delft Clay Alternative
Handy for ski-mming and stirring metal. Heat controls to plus or minus 10 degrees. Heat resistance is 565F. Parts a & b are mixed 100A & 3B by weight. Designed specifically for casting metals. Made in USA. Lead ladle for bullet casting. Easily handles 4-cavity molds. Same infinite heat Control as used on the Product Pot.
Delft Clay Alternative. Pot life is 40 minutes and cure time is 24 hours. Works Quickly and Efficiently.
Do-It Molds Hot Pot-2
Etc. Made in the USA. Made in USA. Econimical furnace with 10 lb capacity. 120 volts ac, 500 watts, by Palmer Mfg. Inc. 10 pound petrobond Casting Sand. Parts a & b are mixed 100A & 3B by weight. Manufacturer: Do-It Molds. The hot pot-2 both melts and pours lead. Designed specifically for casting metals. Features: 3" x 1 3/4", 4 lb.
Easily handles 4-cavity molds. Same infinite heat Control as used on the Product Pot.
Lyman Casting Dipper, Multicolor, One Size
Delft Clay Alternative. Easily handles 4-cavity molds. Same infinite heat Control as used on the Product Pot. Cast iron head keeps alloy warm during pour. Can be used with gold, Silver, Copper, Aluminum. Heat controls to plus or minus 10 degrees. Left or right hand Use. 140 mesh sharp silica Sand, Resin and Oil. Do-it molds hotpot-2.
Our dipper with cast iron head is shaped for easy, accurate pouring and prevents air pockets in the finished bullet. Econimical furnace with 10 lb capacity. 10 pound petrobond Casting Sand. Heat resistance is 565F.
LEE PRECISION Production Pot IV Grey
It uses only 500 watts of power during heat-up and a lot less to maintain temperature. Can be used with gold, Copper, Silver, Aluminum. Etc. Made in the USA. Works Quickly and Efficiently. The average melt time is less than 20 minutes. Heavy aliminum construction. 140 mesh sharp silica Sand, Resin and Oil. Lead ladle for bullet casting.
Delft Clay Alternative. Handy for ski-mming and stirring metal. Designed specifically for casting metals.
Alloy R98 Pewter Casting Ingot Tin 98%, Bismuth 1.5%, Copper .50% - RotoMetals Lead Free Pewter
High heat resistance Tin Silicone Rubber. Shaped for easy, accurate pouring. Heat controls to plus or minus 10 degrees. Lead ladle for bullet casting. Made in USA. Works Quickly and Efficiently. The bismuth helps minimize shrinkage for small details. Holds approximately 10 pounds of lead. Has a large, stable base for safety.
Capable of reaching 900 Degrees Fahrenheit. The melting temperature is around 466 - 590 F. 1 pound. 9 to 1. 1. These alloys can also be used to cast into plaster of paris, sand, and rubber molds.
Britannia Alloy - Pewter Ingot 2lbs - Lead Free
Specifications - melting point f = 563 | pouring temp f = 650 | density g/cm3 = 7. 28 | analysis: TIN 91. 9708%, antimony 7. 4992%, copper 05001%. Packaging - this 2lb pewter ingot will arrive sealed inside of heavy duty BPA free plastic to prevent any corrosion or oxidation. This is lead-free pewter and is very good to use for casting.
This pewter is used often in jewelry making and also making utensils, urns, teapots, maces, candlesticks, and drinking vessels. This item is one of our best sellers because of its versatility and ease of use. Great for Casting! Costume Jewelry. Heat controls to plus or minus 10 degrees. Handy for ski-mming and stirring metal.