Black 5/16″ 4 Stud Power Distribution Block -BUSBAR- With Cover

Stainless steel hardware for extreme Conditions Including Use In Marine Environments - Detachable Cover Included To Protect Connections. Each block can maintain multiple connections, making them flexible and robust for a variety of uses. Measures approximately 1 3/8" wide x 1 7/8" Tall x 6 5/8" Long. Nickel plated brass contact Plate For Optimal Current Transfer And Weather Resistance.

. High quality 4 point power distribution block. These blocks allow for multiple connections to positive and negative systems. Features: connection plate made from nickel-plated copper which gives 40% better conductivity than tin-plating Max Amperage: 250 amps @ 12 vdc / stud connection, 20 amps @ 12 vdc / Screw connection Max Voltage: 48VDC Connection studs made from stainless steel Base Material: Glass-Filled Nylon Black 3 stainless steel #8-32 connection screws Mounting center: 5.

7 inch 4 stainless steel 5/16" studs & 3 stainless steel Screws #8-32 Making This Busbar Suitable For a Variety Of Applications. Rated for 250 amps @ 12 vdc / stud connection, 20 amps @ 12 vdc / Screw connection & Max Volts = 48 vdc.

SELTERM 10 Pack 2 Gauge 2 AWG 5/16" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets

Close end pad seals Out Moisture Keeping Cables Dry. Ul tested & Approved. Made from 100% annealed Tinned Copper for Max Current Flow. To ensure corrosion resistance the tin-plated lugs are salt spray tested to ASTM B 117. Can be Crimped or Soldered. Corrosion free Ideal for Marine Automotive or Outdoor Use. The battery Cable lugs meet S.

A. E conductivity standards and are tested to UL 486 with voltage rating of up to 600 V. Selterm marine grade copper Lugs are manufactured using industry leading processes to guarantee a high-quality product.

SELTERM 10 Pack 4 Gauge 4 AWG 5/16" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug

Made from 100% annealed Tinned Copper for Max Current Flow. Can be Crimped or Soldered. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Copper tubing used for producing the battery cable lugs meet ASTM B 188 electrical grade standard. Close end pad seals Out Moisture Keeping Cables Dry.

The copper lugs also meet S. A. E conductivity standards and are RoHS compliant. Close end pad seals Out Moisture Keeping Cables Dry. The copper eyelet connectors are rated for up to 600 volts and tested to ANSI/UL 486 standard. Lugs are suitable for use with Welding Cables and Battery Cables. Furthermore, the copper battery lugs are both UL and CUL listed to ensure optimal performance once installed.

Ul tested & Approved. Can be Crimped or Soldered. Heavy duty construction for Enhanced High Temperature Durability. Heavy duty battery cable lugs from SELTERM are manufactured using industry leading manufacturing processes to guarantee a high-quality product. Corrosion free Ideal for Marine Automotive or Outdoor Use.

Ul tested & Approved.

Fastronix 5/16" 4 Stud Power Distribution Block with Cover

3 additional 20 amp Screw Terminals for Smaller Wires. Can be Crimped or Soldered. Ul tested & Approved. The fastronix 4 stud power distribution Block is the best way to consolidate your high current power cables in one protected location. Included with the block are 3 smaller 20 Amp screw terminals for additional power wires.

This block features 4 heavy duty 5/16" stainless steel studs integrated with a nickel plated brass bus-bar to provide a single location for your heavy duty power cables. Also included is a heavy duty cover secured by two coated screw caps to ensure your connections are protected from inadvertent shorting.

Install nuts using ANTI-SEIZE thread lubricant. Nickel plated brass bus-Bar and Stainless Steel Hardware for Increased Current Transfer. Heavy duty construction for Enhanced High Temperature Durability. Maximum torque for 5/16" studs is 12 ft-lbs. Use with fastronix 2 and 4 gauge quality Copper Lugs 405-012 and 405-112.

Can be Crimped or Soldered. Close end pad seals Out Moisture Keeping Cables Dry. Corrosion free Ideal for Marine Automotive or Outdoor Use. Corrosion resistant 5/16" Stainless Steel Studs.

Blue Sea Systems ST Blade Fuse Block - 12 Circuits with Negative Bus & Cover

Can be used for 24-hour circuits. Positive distribution bus with #10-32 stud. Corrosion resistant 5/16" Stainless Steel Studs. Accepts ato and ATC fast acting blade fuses. Heavy duty construction for Enhanced High Temperature Durability. Can be Crimped or Soldered. Fuses sold separately. Close end pad seals Out Moisture Keeping Cables Dry.

Close end pad seals Out Moisture Keeping Cables Dry. Ul tested & Approved. Made from 100% annealed Tinned Copper for Max Current Flow. Block is 6. 5"x 1. 5"x 2" and rated to 250 Amps at 12VDC. Nickel plated brass bus-Bar and Stainless Steel Hardware for Increased Current Transfer. Use with fastronix 2 and 4 gauge quality Copper Lugs 405-012 and 405-112.

Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Corrosion free Ideal for Marine Automotive or Outdoor Use. 3. 32"w x 6. 5"h x 1.

Blue Sea Systems m-Series Mini On-Off Battery Switch with Knob- Red

Accepts ato and ATC fast acting blade fuses. Close end pad seals Out Moisture Keeping Cables Dry. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Made from 100% annealed Tinned Copper for Max Current Flow. Block is 6. 5"x 1. 5"x 2" and rated to 250 Amps at 12VDC. Heavy duty construction for Enhanced High Temperature Durability.

Can be Crimped or Soldered. Case design allows surface, front panel, or rear panel mounting. Can be Crimped or Soldered. Ip66 waterproof, iso 8846 and meets ABYC requirements. Ul tested & Approved. Close end pad seals Out Moisture Keeping Cables Dry. 3 additional 20 amp Screw Terminals for Smaller Wires. Nickel plated brass bus-Bar and Stainless Steel Hardware for Increased Current Transfer.

Isolating cover with Snap-On sections protects rear contacts. Corrosion resistant 5/16" Stainless Steel Studs. Ignition protected, safe for installation aboard gasoline powered boats. Make before break contact design allows switching between battery banks without power interruption.

Fastronix 3/8" 4 Stud Power Distribution Block with Cover

Block is 6. 5"x 1. 375"x 2" and rated to 250 Amps at 12VDC. Ul tested & Approved. Block is 6. 5"x 1. 5"x 2" and rated to 250 Amps at 12VDC. Can be Crimped or Soldered. 3 additional 20 amp Screw Terminals for Smaller Wires. This block features 4 heavy duty 3/8" stainless steel studs integrated with a nickel plated brass bus-bar to provide a single location for your heavy duty power cables.

Positive distribution bus with #10-32 stud. Switches a single battery to a single load group. Mounting hardware not included. Heavy duty construction for Enhanced High Temperature Durability. Install nuts using ANTI-SEIZE thread lubricant. Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses.

Continuous rating: 300A, Maximum Voltage: 48V DC. Also included is a heavy duty cover secured by two coated screw caps to ensure your connections are protected from inadvertent shorting. 3 additional 20 amp Screw Terminals for Smaller Wires. Nickel plated brass bus-Bar and Stainless Steel Hardware for Increased Current Transfer.

Ip66 waterproof, iso 8846 and meets ABYC requirements.

Blue Sea Systems 2315 Minibus 100 Ampere Common BusBar 4 x 10-32 Stud Terminal with Cover

Corrosion resistant 3/8" Stainless Steel Studs. St blade fuse block - 12 circuits with negative bus and cover. Corrosion resistant 5/16" Stainless Steel Studs. Mounting hardware not included. Bus bar, mfg# 2315, common bus with four #10-24 studs. 100a mini busbar with 4 studs and a cover. Use with fastronix 2 and 4 gauge quality Copper Lugs 405-012 and 405-112.

Max voltage: 300v aC/ 48V DC. Use with fastronix 2 and 4 gauge quality Copper Lugs 405-013 and 405-113. Positive distribution bus with #10-32 stud. Ul tested & Approved. Accepts ato and ATC fast acting blade fuses. Ip66 waterproof, iso 8846 and meets ABYC requirements. Close end pad seals Out Moisture Keeping Cables Dry.

Includes cover. Continuous rating: 300A, Maximum Voltage: 48V DC. Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses. Block is 6. 5"x 1.

Ancor Marine Grade Primary Wire and Battery Cable Red, 25 Feet, 8 AWG

Ul tested & Approved. Switches a single battery to a single load group. 3 additional 20 amp Screw Terminals for Smaller Wires. Continuous rating: 100A AC/DC. 3 additional 20 amp Screw Terminals for Smaller Wires. Block is 6. 5"x 1. 375"x 2" and rated to 250 Amps at 12VDC. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection.

Close end pad seals Out Moisture Keeping Cables Dry. Max voltage: 300v aC/ 48V DC. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity, cover made with clear polycarbonate. Ip66 waterproof, iso 8846 and meets ABYC requirements. Mounting hardware not included. Accepts ato and ATC fast acting blade fuses.

Corrosion resistant 5/16" Stainless Steel Studs. Heavy duty construction for Enhanced High Temperature Durability. Close end pad seals Out Moisture Keeping Cables Dry. Use with fastronix 2 and 4 gauge quality Copper Lugs 405-013 and 405-113. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity.



Blue Sea Systems 5191 Fuse Block Terminal 30-300 AMP

Nickel plated brass bus-Bar and Stainless Steel Hardware for Increased Current Transfer. Corrosion resistant 5/16" Stainless Steel Studs. Block is 6. 5"x 1. 5"x 2" and rated to 250 Amps at 12VDC. Can be Crimped or Soldered. Use with fastronix 2 and 4 gauge quality Copper Lugs 405-013 and 405-113. Make before break contact design allows switching between battery banks without power interruption.

Provides high current protection in tight space constraints. Positive distribution bus with #10-32 stud. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Ignition protected when used with MRBF fuses. 2 mounting holes accept #10 M5 screws. Manufactured from individual copper strands and tinned to perform in the harshest marine environments.

They are constructed with premium vinyl insulation that is rated at 600 volts, 105 deg C dry and 75 deg C wet, battery acid, gasoline, heat, stays flexible even in extreme cold -40 deg F/C and resists salt water, oil, abrasion and ultra-violet radiation. Voltage max operating: 58v dc, terminal fuses avail.

30a-300a, terminal stud size: 5/16"-18 8mm, amps max operating: 300A per block, Mounting Hole Size: #10 5mm3/8". Compact, inverter, high-amp fuse-appropriate for DC Main, windlass, and bow thruster circuit protection.

TEMCo Hammer Lug Crimper Tool 5 Year Warranty

Mounting hardware not included. 25 feet of red 8 AWG marine grade wire. Close end pad seals Out Moisture Keeping Cables Dry. Single circuit on-off. Block is 6. 5"x 1. 375"x 2" and rated to 250 Amps at 12VDC. Switches a single battery to a single load group. Fuses sold separately. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection.

Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses. Heavy duty construction for Enhanced High Temperature Durability. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity, cover made with clear polycarbonate.

St blade fuse block - 12 circuits with negative bus and cover. Terminal Type: Uninsulated. Wire gauge: 8 awg, 2 awg, 1/0, 6 awg, 4 awg, 1 awg, 2/0, 3/0 and 4/0. Ideal for Battery and Welding Cables. Temco industrial's 1 year free Return and 5 Year Void-Free Warranty. Can be used for 24-hour circuits. Place stripped wire in terminal.