DerBlue 6 Pieces Side Mounted Horizontal Liquid Float Switch Water Level Sensor

#ad
DerBlue #ad - It will be buffer by adding small relays such as HH54P. Temperature rating : -10~80℃ ;accurate error: ±2mm (In the water);Repeatability: ±1mm (In the water). Thread diaapprox : 1. 54cm / 3. 5";cable length : 40cm / 06";hex head sizeapprox : 2. 4cm / 09";body total Length : 8. 8cm / 15. 8". Color : black;net weight : 20g;Package Content : 6 x Water Level Sensor.

Float ball material : p. P;float body material : P. P;switch forms:N. O /n. C(open and close frequently). Max contact rating : 10w;max switching current : 05a;max breakdown voltage : 110V DC;. The description of products:the plastic float switch of side mount duckbilled is a frequently opened, switching contact and with the overall brake, often closed, it's installed from the outside and doesn't need to be sealed.

DerBlue 6 Pieces Side Mounted Horizontal Liquid Float Switch Water Level Sensor #ad - The main parameters of products:installation: it is installed horizontally drilling at the bottom or at the topThe texture of guide rod: PP plasticThe texture of floater: PP plasticPressure of work: 15 BarTemperature of work: -10~80℃Accurate error: ±2mm (In the waterRepeatability: ±1mm (In the waterSwitch forms:N.

O /n. C(open and close frequently max contact Rating :10WThe voltage of work:110VDCThe current of work: 0

#ad



Anndason 6 Pieces Plastic PP Float Switch Fish Tank Liquid Water Level Sensor,Model: DP5200

#ad
Anndason #ad - Dp5200;max contact Rating : 10W. Please note: because the current that the switch can carry is much little05a, you must use a relay or contactor when it is connected by a load, relay or contactor are not included here. Feature: this float switch is a device used to sense the level of liquid within a tank, an alarm, the switch may activate a pump, an indicator, or other device.

Temperature rating : -10 / +85 celsuis;float Ball Material : P. P;float body Material : P. P. Cable length : 39cm / 2. 6" x087" thread diaapprox : 16mm / 15. 3";switch body size : 65 x 22mm / 063". It can be easily converted from normally open to normally close by inverting the float. Simple structure, easy installation liquid level controller.

Anndason 6 Pieces Plastic PP Float Switch Fish Tank Liquid Water Level Sensor,Model: DP5200 #ad - Light weight and simple working principle, high reliability. Package content 6 x float switch Package content : 6 x water Level Sensor ;Color :Light blue and yellow. Model no. Max switching current : 0

#ad



DIGITEN DC 12V 1/4" Inlet Feed Water Solenoid Valve Quick Connect N/C normally Closed

#ad
DIGITEN #ad - Package content : 6 x water Level Sensor ;Color :Light blue and yellow. Dp5200;max contact Rating : 10W. Pay attentionfew buyers use our N/C normally closed solenoid valve to make it work long hours t would become very hot because there are so many coils inside. Model no. It's safe voltage for people. In the product reviews, some buyer also mentioned if someone requires the solenoid valve works for a long time, he should buy N/O normally open solenoid valve, so that it will open all the time without power and will not be hot.

If you want it works long hours, you should find a N/O normally open solenoid valve. Temperature rating : -10 / +85 celsuis;float Ball Material : P. P;float body Material : P. P. But this operation is unreasonable. It's normal and safe phenomenon. The highest working temperature of this product reaches 60℃. We continually tests and tracks the product's working status, the highest working temperature of this product reaches 60℃, and the plastic part withstand extremely high temperatures to 150℃.

DIGITEN DC 12V 1/4" Inlet Feed Water Solenoid Valve Quick Connect N/C normally Closed #ad - It's normal and safe phenomenon. Max switching current : 0

#ad



Anndason 6 Pieces Black Water Level Sensor Aquarium Tank Side Mounted Horizontal Liquid Float Switch

#ad
Anndason #ad - Temperature rating : -10 / +85 celsuis;float Ball Material : P. P;float body Material : P. P. Cable length : 39cm / 2. 6" x087" thread diaapprox : 16mm / 15. 3";switch body size : 65 x 22mm / 063". Dc 12v 1/4" quick connect Solenoid valve. Turn on water when system start;and cut off water when system stop. Working pressure:0

02-08mpa. 3. It can be easily converted from normally open to normally close by invertin the float. Dp5200;max contact Rating : 10W. Model no. 2. The switch may actuate a pump, an indicator, an alarm, or other device. Max contact rating : 10w;max Switching Voltage : 100V DC. If you want it works long hours, you should find a N/O normally open solenoid valve.

Anndason 6 Pieces Black Water Level Sensor Aquarium Tank Side Mounted Horizontal Liquid Float Switch #ad - Color : black;net weight : 24g;Package Content : 6 x Water Level Sensor. Material: plastic Color :Black Features: 1. The float switch is a device used to sense the level of liquid within a tank. Thread diaapprox : 1.

#ad



uxcell 5pcs ZP4510 Liquid Water Level Sensor Vertical Float Switches

#ad
uxcell US-SA-AJD-37192 #ad - Max contact rating : 10w;max Switching Voltage : 100V DC. If you want it works long hours, you should find a N/O normally open solenoid valve. Color : black;net weight : 24g;Package Content : 6 x Water Level Sensor. Specifications:product name: float switchmax Contact: Rating 10WMax Switching Voltage: 100V DCMax Switching Current: 0

5amax breakdown voltage: 220V DCMax Carry Current: 1. 0amax contact resistance: 100mohmtemperature rating: -10 ~ +60 c / 85 cfloat ball material: ppfloatbody material: ppfloat Ball SizeApprox: 22 x 24mmL*DThread DiaApprox: M9mmBody Total Length: 58mm Cable Length: 37cm Color: WhiteNet Weight: 8g Package Content 5 x Float SwitchDescription:1.

uxcell 5pcs ZP4510 Liquid Water Level Sensor Vertical Float Switches #ad - A float switch is a device used to sense the level of liquid within a tank. 2. The switch may actuate a pump, an alarm, an indicator, or other device.3. It can be easily converted from normally open to normally close by inverting the float. 4. Note: because the current that the switch can carry is much little0

5a, you must use a relay or contactor when it is connected by a load, relay and contactor are not included here. Thread diaapprox : 1.

#ad



JBtek 4 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM

#ad
JBtek 4450182 #ad - Max switching current : 05a;max breakdown voltage : 220V DC;Max Carry Current : 1. 0a;max contact Resistance : 100m ohm. Max switching voltage : 220v dc/ac;max switching current : 1. 5a;max breakdown voltage : 300v DC/AC;Max Carry Current : 3A. Temperature rating : -10 / +85 celsuis;float Ball Material : P. P;float body Material : P.

P. It's normal and safe phenomenon. Equiped with high-current relay, AC250V 10A ; DC30V 10A. 5v 4-channel relay interface board, and each one needs 50-60mA Driver Current. Its working temperature:32-158℉ 0-70℃. Rated power:4. 8w. It will become hot because there are so many coils inside. Zp4510;max contact rating : max Contact Rating;10W : 10W.

JBtek 4 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM #ad - Application:supports all mCU control, The industrial field, PLC control, Smart home control. Indication LED's for Relay output status. Thread diaapprox : 1. 54cm / 3. 5";cable length : 40cm / 1";body total length : 8.

#ad



Decdeal Submersible Water Pump DC 12V 5W Ultra-Quiet Pump for Pond, Aquarium, 280L/H Lift 300cm

#ad
Decdeal H10448 #ad - Maintenance-free. Equiped with high-current relay, AC250V 10A ; DC30V 10A. 3. Liquid temperature: 60°C Cable Length: 100cm / 39. 4in product Size: 59. 5 * 49 * 42mm / 2. 34 * 1. 9 * 1. 65in  product weight: 67g / 2. 37oz package Size: 6. 3 * 6 * 5. 4cm / 2. 5 * 2. 36 * 2. 12in package weight: 82g / 2. 9oz package list: 1 * dc12v brushless pump 1 * filter 1 * User ManualEnglish Package content : 6 x water Level Sensor ;Color :Light blue and yellow.

Temperature rating : -10 ~ +85 c;float ball material : p. P;float body Material : P. P;float ball SizeApprox : 2. 35 x 1. 7cm l*D. Its working temperature:32-158℉ 0-70℃. Rated power:4. 8w. It will become hot because there are so many coils inside. Cable length : 39cm / 2. 6" x0

#ad



HiLetgo 3pcs ESP8266 NodeMCU CP2102 ESP-12E Internet WiFi Development Board Open Source Serial Wireless Module Works Great with Arduino IDE/Micropython Pack of 3PCS

#ad
HiLetgo #ad - 5v 4-channel relay interface board, and each one needs 50-60mA Driver Current. Download and run the 32 bit flasher exe at GithubSearch for nodemcu/nodemcu-flasher/tree/master/ at Github github. Com/nodemcu/nodemcu-flasher/tree/master/Win32/Release Or download and run the 64 bit flasher exe at: github. Com/nodemcu/nodemcu-flasher/tree/master/Win64/Release 7.

Data download access to the website: http://www. Nodemcu. Com. Load, compile and upload. Download the Arduino IDE, the latest version. Install the IDE 3. Max switching current : 05a;max breakdown voltage : 220V DC;Max Carry Current : 1. 0a;max contact resistance : 100m Ohm. Instruction & Steps of How to use: 1. Max switching current : 0

HiLetgo 3pcs ESP8266 NodeMCU CP2102 ESP-12E Internet WiFi Development Board Open Source Serial Wireless Module Works Great with Arduino IDE/Micropython Pack of 3PCS #ad - 5a;max breakdown voltage : 220V DC;Max Carry Current : 1. 0a;max contact Resistance : 100m ohm. Thread diaapprox : 1. 54cm / 3.

#ad



12V Plastic Water Solenoid Valve

#ad
Adafruit Industries 997 #ad - For a power supply, our 9v 1A or 12V 1A power adapters will do the job. Temperature rating : -10 / +85 celsuis;float Ball Material : P. P;float body Material : P. P. Max switching current : 05a;max breakdown voltage : 220V DC;Max Carry Current : 1. 0a;max contact resistance : 100m Ohm. Also, liquid can only flow one direction.

We suggest a tip120 or n-channel power FET with a 1N4001 kickback diode to drive this from a microcontroller pin. Data download access to the website: http://www. Nodemcu. Com. Suitable for aquarium, car cooling, fountain, computer water cooling system and circulation systems. Esp8266 cp2102 nodemcu lua esp-12e wifi serial Wireless Module.

12V Plastic Water Solenoid Valve #ad - Zp4510;max contact rating : max Contact Rating;10W : 10W. Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython. Max contact resistance : 100m ohm;temperature rating : -10 / +85 Celsuis;Float Ball Material : P. P;float body Material : P. P. Model no.

#ad



Anndason 6 Pieces Plastic PP Float Switch Fish Tank Liquid Water Level Sensor,Model: DP3500

#ad
Anndason #ad - Full i/o port and wireless 802. 11 supported, direct download no need to reset. Stator and circuit board sealed by epoxy resin. Adopt high performance stainless steel shaft. Small size, high efficiency, low noise less than 35db. Ip68 waterproof grade, totally submersible in the water. Cable length : 39cm / 2. 6" x0

87" thread diaapprox : 16mm / 15. 3";switch body size : 65 x 22mm / 063". Dc 12v 1/4" quick connect Solenoid valve. Turn on water when system start;and cut off water when system stop. Working pressure:002-08mpa. Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython. Suitable for aquarium, fountain, car cooling, computer water cooling system and circulation systems.

Anndason 6 Pieces Plastic PP Float Switch Fish Tank Liquid Water Level Sensor,Model: DP3500 #ad - Esp8266 cp2102 nodemcu lua esp-12e wifi serial Wireless Module. Dp5200;max contact Rating : 10W. Requires 3 psi water pressure to operate not a lot of pressure. Temperature rating : -10 ~ +85 c;float ball material : p.

#ad



Lifegard Aquatics 1/2-Inch Double Threaded Bulkhead

#ad
Lifegard Aquatics 1/2" Double #ad - Dp5200;max contact Rating : 10W. Cable length : 38cm / 1. 8" x07" thread diaapprox : 13mm / 15";switch Body Size : 45 x 17mm / 05". Heavy wall bulkhead is molded of highest impact resistant PVC eliminating possibility of finding hidden cracks when filling aquarium. Custom installations are easier and safer with all parts included in this convenient 1/2-inch Double Threaded Bulkhead.

Max switching current : 05a;max breakdown voltage : 220V DC;Max Carry Current : 1. 0a;max contact Resistance : 100m ohm. Temperature rating : -10 / +85 celsuis;float Ball Material : P. P;float body Material : P. P. Equiped with high-current relay, AC250V 10A ; DC30V 10A. Requires 3 psi water pressure to operate not a lot of pressure.

Lifegard Aquatics 1/2-Inch Double Threaded Bulkhead #ad - Dp3500; max contact Rating : 10W. Temperature rating : -10 / +85 celsuis;float Ball Material : P. P;float body Material : P. P. Stator and circuit board sealed by epoxy resin.

#ad