HY-C MH-6R Magic Heat Bottom Crimp Heat Reclaimer for Use with Wood Burning Appliances, UL Listed, Fits 6″ Single Wall Chimney Pipe

#ad
HY-C MH-6R #ad - The 225 cfm fan pushes out the warmed air through the tubes and into your home reclaiming up to 30, 000 British Thermal Units BTU of lost heat. Made in the USA. A toggle switch allows the 225 cfm fan to operate in two modes, either run continuously or a pre-set thermostat automatically turns the blower fan on when the Magic Heat casing reaches 150 degrees and off at 120 degrees.

Built in soot scraper cleans tubes internally allowing for maximum heat transfer. Plugs into any standard 110v household outlet. Removable back allows for easy maintenance. One year Limited Warranty. Only ul listed heat reclaimer on the market. Magic heat is easy to install and must be installed between 12 and 24 inches from the appliance flue outlet using single wall connector pipe.

HY-C MH-6R Magic Heat Bottom Crimp Heat Reclaimer for Use with Wood Burning Appliances, UL Listed, Fits 6" Single Wall Chimney Pipe #ad - Fresh room air enters thru the back vents and is heated while traveling through the transfer tubes. How it works: as hot flue gases travel from your heating appliance upward through the flu, they heat the transfer tubes in the inner case. Magic heat is the only UL listed heat reclaimer on the market. Designed for use with single wall connector pipe.

Toggle switch allows the 225 cfm fan to operate in two modes, either run continuously or thermostat control mode. Reclaims up to 30% of otherwise lost heat going up your chimney and distributes it into your home.

#ad



UNITED STATES HDW, Black BM0023 6" Corrugated Elbow, 1

#ad
Standard Plumbing Supply BM0023 #ad - Used to connect two lengths of flue pipe together. Brand name: united stATES HDW. Fixed at 90 degree. Item weight: 1. 95 lb. Color: Black. Size: 6" color: black 24 gauge used to connect two lengths of flue pipe together Fixed at 90 degree. Country of Origin: United States.

#ad



Magnetic Wood Stove Thermometer Fire Stove Pipe Thermometer Flue Pipe Temperature Meter for Avoiding Stove Fan Damaged by Overheating 2

#ad
Frienda #ad - The creosote buildup, optimum performance and overheat period is noted on the dial to monitor and optimize the work efficiency of your stove, easy to read with large dial. Changing of different temperature: Creosote buildup indicates temperature is too low which can cause creosote and tar deposits in the stove and chimney.

Country of Origin: United States. Overheat indicates temperature is too high, risks of stove/chimney/stove fan being damaged. Specifications: measuring range: 100-900 ℉/100-500 ℃ color: as shown in the picture Material: aluminum dial, bimetal sensor, brass pointer and metal handle Dial size: 2. 45 inch/ 6 cm in length Item weight: 1.

95 lb. Product strengths: a magnet on the back offers a convenient placing, the stove flue pipe thermometer can be placed on stove top or side. Temperature range: the measuring temperature of these flue pipe temperature meter ranges from 100-900 ℉/100-500 ℃, providing accurate measuring of temperature, easy to read with large dial.

Magnetic Wood Stove Thermometer Fire Stove Pipe Thermometer Flue Pipe Temperature Meter for Avoiding Stove Fan Damaged by Overheating 2 #ad - Work efficiently: the creosote buildup, optimum performance and overheat period is noted on the dial to monitor and optimize the work efficiency of your stove, avoiding stove/chimney/stove fan being damaged by overheat. Color: Black. Material choosing: material choice of aluminum dial, brass pointer, bimetal sensor, sturdy and easy operation, metal handle, which offers a good monitoring of stove temperature for your family.

What you get: magnetic wood stove thermometers are in 1 package for you, which makes a good control of stove temperature, enough for your daily using.

#ad



Imperial Manufacturing Group BM0111 6" X 24" Black Matte Stove Pipe

#ad
Imperial Manufacturing Group U BM0111 #ad - 24 gauge. 24 gauge. Color: Black. Size: 6" x 24" 24 gauge color: Black Used to connect woodstove to entrance of chimney. Size: 6" x 24". Work efficiently: the creosote buildup, optimum performance and overheat period is noted on the dial to monitor and optimize the work efficiency of your stove, avoiding stove/chimney/stove fan being damaged by overheat.

Material choosing: material choice of aluminum dial, sturdy and easy operation, metal handle, bimetal sensor, brass pointer, which offers a good monitoring of stove temperature for your family. What you get: magnetic wood stove thermometers are in 1 package for you, which makes a good control of stove temperature, enough for your daily using.

Imperial Manufacturing Group BM0111 6" X 24" Black Matte Stove Pipe #ad - Country of Origin: United States. Brand name: united stATES HDW. Used to connect woodstove to entrance of chimney. Temperature range: the measuring temperature of these flue pipe temperature meter ranges from 100-900 ℉/100-500 ℃, providing accurate measuring of temperature, easy to read with large dial.

Color: Black. Convenient placing: a magnet on the back allows these stove flue pipe thermometers to be placed on stove top or side; The fire stove pipe thermometer only suits for single wall flue pipe and please do not attach it on grilles directly. Item weight: 1. 95 lb.

#ad



UNITED STATES HDW BM0102 Street Stove Pipe, Black

#ad
Standard Plumbing Supply BM0102 #ad - Color: Black. Work efficiently: the creosote buildup, optimum performance and overheat period is noted on the dial to monitor and optimize the work efficiency of your stove, avoiding stove/chimney/stove fan being damaged by overheat. This product is Highly durable. Size: 6" x 24". Highly durable. 24 gauge. This product is Manufactured in China.

Used to connect woodstove to entrance of chimney. Manufactured in China. Easy to use. Convenient placing: a magnet on the back allows these stove flue pipe thermometers to be placed on stove top or side; The fire stove pipe thermometer only suits for single wall flue pipe and please do not attach it on grilles directly.

UNITED STATES HDW BM0102 Street Stove Pipe, Black #ad - 6" x 12", 24 ga black stove Pipe, Half Joint. Color: Black. Temperature range: the measuring temperature of these flue pipe temperature meter ranges from 100-900 ℉/100-500 ℃, providing accurate measuring of temperature, easy to read with large dial. Country of Origin: United States. Item weight: 1. 95 lb. Material choosing: material choice of aluminum dial, brass pointer, sturdy and easy operation, metal handle, bimetal sensor, which offers a good monitoring of stove temperature for your family.

#ad



Duravent 6" DuraPlus Through the Wall Kit

#ad
Duravent SD9088 #ad - Supports up to 40 feet of chimney pipe not included. Used to connect woodstove to entrance of chimney. Manufactured in China. Size: 6" x 24". The triple-wall chimney features two insulating layers: ceramic blanket and air space. Color: Black. Highly durable. All-in-one kit saves time and guesswork. Safe, triple-wall design.

Easy to use. Work efficiently: the creosote buildup, optimum performance and overheat period is noted on the dial to monitor and optimize the work efficiency of your stove, avoiding stove/chimney/stove fan being damaged by overheat. Temperature range: the measuring temperature of these flue pipe temperature meter ranges from 100-900 ℉/100-500 ℃, providing accurate measuring of temperature, easy to read with large dial.

Duravent 6" DuraPlus Through the Wall Kit #ad - For use with a wood-burning stove. Brand name: united stATES HDW. In the event of a creosote fire, the compressible blanket insulation permits the chimney liner to expand outward in a radial direction, providing a fire-safe design. Material choosing: material choice of aluminum dial, metal handle, bimetal sensor, brass pointer, sturdy and easy operation, which offers a good monitoring of stove temperature for your family.

What you get: magnetic wood stove thermometers are in 1 package for you, which makes a good control of stove temperature, enough for your daily using. Secure twist-lock design.

#ad



Rutland Products 701-6 Magnetic Burn Indicator, Red

#ad
Rutland 701-6 #ad - Convenient placing: a magnet on the back allows these stove flue pipe thermometers to be placed on stove top or side; The fire stove pipe thermometer only suits for single wall flue pipe and please do not attach it on grilles directly. Country of Origin: United States. Color: Black. Easy to use. Temperature range: the measuring temperature of these flue pipe temperature meter ranges from 100-900 ℉/100-500 ℃, providing accurate measuring of temperature, easy to read with large dial.

Work efficiently: the creosote buildup, optimum performance and overheat period is noted on the dial to monitor and optimize the work efficiency of your stove, avoiding stove/chimney/stove fan being damaged by overheat. The heat-sensitive face will darken in color when exposed to unsafe temperatures. Indicates overheating or a low-temperature creosote buildup hazard.

Rutland Products 701-6 Magnetic Burn Indicator, Red #ad - Size: 6" x 24". Item weight: 1. 95 lb. Rutland magnetic burn indicator monitors the performance of your wood- or coal-burning stove. Low-fire zone indicates excessive creosote buildup. Used to connect woodstove to entrance of chimney.

#ad



Duravent 6" x 36" Stainless Class A Triple Wall Chimney Pipe

#ad
Duravent SD9017SS #ad - The triple-wall chimney features two insulating layers: ceramic blanket and air space. Low-fire zone indicates excessive creosote buildup. Country of Origin: United States. Perfect for any wood stove with a 6" flue. Convenient placing: a magnet on the back allows these stove flue pipe thermometers to be placed on stove top or side; The fire stove pipe thermometer only suits for single wall flue pipe and please do not attach it on grilles directly.

Material choosing: material choice of aluminum dial, bimetal sensor, sturdy and easy operation, metal handle, brass pointer, which offers a good monitoring of stove temperature for your family. What you get: magnetic wood stove thermometers are in 1 package for you, which makes a good control of stove temperature, enough for your daily using.

Duravent 6" x 36" Stainless Class A Triple Wall Chimney Pipe #ad - In the event of a creosote fire, the compressible blanket insulation permits the chimney liner to expand outward in a radial direction, providing a fire-safe design. Item weight: 1. 95 lb. Ul approved ht103 rating for chimney fire up to 2100 degrees. Color: Black. Brand name: united stATES HDW. Used to connect woodstove to entrance of chimney.

#ad



Selkirk Metalbestos 256240 6-Inch DSP Chimney Pipe Adapter

#ad
Jensen (Home Improvement) 256240 #ad - Indicates from 100°f to 800°f 35°C to 430°C. Manufactured in china. Highly durable. Size: 6" x 24". 24 gauge. Supports up to 40 feet of chimney pipe not included. Through-the-wall vertical chimney installation kit for 6" DuraPlus chimney pipe. Clearances are reduced to 6-Inch from combustibles. Used to connect woodstove to entrance of chimney.

Manufactured in China. Color: Black. Adapts smoke pipe to class A chimney. Chimney pipe adapter. Safe, triple-wall design. Ul approved ht103 rating for chimney fire up to 2100 degrees. High quality, scratch resistant Black finish. Easy to use. Temperature range: the measuring temperature of these flue pipe temperature meter ranges from 100-900 ℉/100-500 ℃, providing accurate measuring of temperature, easy to read with large dial.

Selkirk Metalbestos 256240 6-Inch DSP Chimney Pipe Adapter #ad - Work efficiently: the creosote buildup, optimum performance and overheat period is noted on the dial to monitor and optimize the work efficiency of your stove, avoiding stove/chimney/stove fan being damaged by overheat. Highly durable. Material choosing: material choice of aluminum dial, sturdy and easy operation, bimetal sensor, metal handle, brass pointer, which offers a good monitoring of stove temperature for your family.

#ad



Dektite Premium #7 Red Silicone Metal Roof Pipe Flashing, High Temp, Square Base, Pipe OD 6" to 12"

#ad
Deks Industries Pty Ltd DFE207RE #ad - Clearances are reduced to 6-Inch from combustibles. 6" inner diameter. All-in-one kit saves time and guesswork. Safe, triple-wall design. Easy to use. Indicates from 100°f to 800°f 35°C to 430°C. Used to connect woodstove to entrance of chimney. Manufactured in China. Work efficiently: the creosote buildup, optimum performance and overheat period is noted on the dial to monitor and optimize the work efficiency of your stove, avoiding stove/chimney/stove fan being damaged by overheat.

Safe, triple-wall design. Supports up to 40 feet of chimney pipe not included. Material choosing: material choice of aluminum dial, bimetal sensor, metal handle, sturdy and easy operation, brass pointer, which offers a good monitoring of stove temperature for your family. What you get: magnetic wood stove thermometers are in 1 package for you, which makes a good control of stove temperature, enough for your daily using.

Dektite Premium #7 Red Silicone Metal Roof Pipe Flashing, High Temp, Square Base, Pipe OD 6" to 12" #ad - Item weight: 1. 95 lb. Size: 6" x 24". Magnetic thermometer made for single wall stove pipes. Easy to use. Low-fire zone indicates excessive creosote buildup.

#ad



Vogelzang 6in. Cast Iron Stove Damper, Model No D-6

#ad
Vogelzang D6 #ad - Perfect for any wood stove with a 6" flue. 24 gauge. Diameter in. 6, color: black, Compatible With: 6in. Temperature range: the measuring temperature of these flue pipe temperature meter ranges from 100-900 ℉/100-500 ℃, providing accurate measuring of temperature, easy to read with large dial. Indicates from 100°f to 800°f 35°C to 430°C.

Safe, triple-wall design. Customers are responsible for checking local codes and regulations prior to purchase. All cast iron. Black or blue stove pipe. This item is not for sale in the state of California and Washington. Manufactured in china. Chimney pipe adapter. High quality, scratch resistant Black finish. Supports up to 40 feet of chimney pipe not included.

Vogelzang 6in. Cast Iron Stove Damper, Model No D-6 #ad - Easy to use. Brand name: united stATES HDW. Over-fire zone indicates wasted fuel and heat. Secure twist-lock design.

#ad