Laboy HMF010326 Glass Single Neck Round Bottom Boiling Flask 500 mL with 24/40 Joint

#ad
Laboy HMF010326 #ad - Capacity of 500Ml. The flasks are usually used in heating or boiling a liquid, in distillation as distilling flasks and receiving flasks for the distillate, used as the distilling flasks in rotary evaporators. Round-bottom flasks also called round-bottomed flasks, or RB Flaskshaving spherical bottoms are more resistant to fracturing under vacuum, Flasks, round bottom, as a sphere more evenly distributes stress across its surface.

Round bottom flask. Because of the spherical bottom, cork rings are needed to keep the round bottom flasks upright. When in use, round-bottom flasks are commonly held at the neck by flask clamps on a stand. Laboy glass flasks are heavy wall designed, made of high-quality borosilicate glass and annealed at 800 degree Celsius, made by hand-blowing to ensure uniform wall thickness, can be heated directly in an open flame and can withstand typical laboratory thermal variations in Chemistry processes like heating and cooling.

Laboy HMF010326 Glass Single Neck Round Bottom Boiling Flask 500 mL with 24/40 Joint #ad - With 24/40 joint. Single neck.

#ad



Laboy HMF010331 Glass Single Neck Round Bottom Boiling Flask 1000 mL with 24/40 Joint

#ad
Laboy HMF010331 #ad - Single neck. Because of the spherical bottom, cork rings are needed to keep the round bottom flasks upright. Laboy glass flasks are heavy wall designed, made of high-quality borosilicate glass and annealed at 800 degree Celsius, made by hand-blowing to ensure uniform wall thickness, can be heated directly in an open flame and can withstand typical laboratory thermal variations in Chemistry processes like heating and cooling.

Round bottom flask. Round-bottom flasks also called round-bottomed flasks, Flasks, round bottom, or RB Flaskshaving spherical bottoms are more resistant to fracturing under vacuum, as a sphere more evenly distributes stress across its surface. Capacity of 1000Ml. Made by hand blowing. The flasks are usually used in heating or boiling a liquid, in distillation as distilling flasks and receiving flasks for the distillate, used as the distilling flasks in rotary evaporators.

Laboy HMF010331 Glass Single Neck Round Bottom Boiling Flask 1000 mL with 24/40 Joint #ad - When in use, round-bottom flasks are commonly held at the neck by flask clamps on a stand. With 24/40 joint.

#ad



EISCO CH0688 Labs Clamp Retort, 3 PVC Coated Prongs Opens to 90mm in Dia. with Boss Head

#ad
EISCO CH0688 #ad - Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Jaws have a capacity of 90 mm. Made by hand blowing. Can mount vertical or horizontal -- rotates on clamp. With 24/40 joint. Round bottom flask. Die casted alloy clamp retort, PVC coated jaws with boss head which accommodates rods up to 15 mm in diameter.

Attaches to rods up to 15 mm in diameter. Extends out approximately 5" from rod, not adjustable. Capacity of 1000Ml. Single neck.

#ad



Laboratory Grade Metalware Set - Support Stand 8" x 5", 12mm Dia. Rod 24" L, Cork Lined Burette Clamp with Boss Head and Retort Ring 2.5" Dia

#ad
EISCO #ad - Extends out approximately 5" from rod, not adjustable. Made by hand blowing. With 24/40 joint. Made from high-quality metal and built to last. Eisco labs proudly manufactures its own products using state-of-the-art equipment, and following the highest standards of quality control. Each product is carefully designed by a team of laboratory professionals and experienced engineers with quality and durability in mind.

Perfect setup for a lab. Attaches to rods up to 15 mm in diameter. Blue powder coated support stand base 8" x 5. 25". Single neck. Stainless steel rod with a powder coated base provides the perfect setup for any experiment. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Laboratory Grade Metalware Set - Support Stand 8" x 5", 12mm Dia. Rod 24" L, Cork Lined Burette Clamp with Boss Head and Retort Ring 2.5" Dia #ad - Everything is in one box. Laboratory grade metalware Set - Support Stand 8" x 5. 25", rod 23" l, 045" dia. 10x.

#ad



5 Sizes - 50ml, 100ml, 250ml, 500ml, 1000ml - Karter Scientific, 3.3 Boro, Griffin Low Form, Glass Beaker Set

#ad
Karter Scientific 213A2 #ad - 3. 3 borosilicate glass. Perfect for beginners or professional use. Heavy duty, will not easily shatter Single neck. Griffin low form. Extends out approximately 5" from rod, not adjustable. Top selling 5 piece economy borosilicate glass beaker set. 4 pronged, cork lined clamp maximum opening, 105cm, screw adjustable bosshead clamp 4.

25". Metal retort ring 2. 6" diameter. With 24/40 joint. Made by hand blowing. 5 sizes - 50, 500, 100, 250, 1000ml. Extra large marking spot. Capacity of 1000Ml. Contains 1 each 50, 100, 250, 500 & 1000ml beakers. Blue powder coated support stand base 8" x 5. 25". Can mount vertical or horizontal -- rotates on clamp. Astm specification E960, Type I requirements.

5 Sizes - 50ml, 100ml, 250ml, 500ml, 1000ml - Karter Scientific, 3.3 Boro, Griffin Low Form, Glass Beaker Set #ad - Round bottom flask. Stainless steel rod 23" length, 0

#ad



Laboy HMA012103-LB Thermometer Adapter Inlet Adapter with 24/40 Inner Joints for Distillation Apparatus

#ad
Beijing Chemduk Lab Equipment Co.,Ltd HMA012103-LB #ad - Blue powder coated support stand base 8" x 5. 25". Fit with thermometer or tubing. Astm specification E960, Type I requirements. Attaches to rods up to 15 mm in diameter. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Made by hand blowing. With 24/40 joint. 5 sizes - 50, 500, 100, 250, 1000ml. Extra large marking spot. Griffin low form. 3. 3 borosilicate glass. Round bottom flask. With 24/40 standard taper inner joint, can be fit for any apparatus with 24/40 outer joint. Extends out approximately 5" from rod, not adjustable. With a compression cap accommodates 5.

Laboy HMA012103-LB Thermometer Adapter Inlet Adapter with 24/40 Inner Joints for Distillation Apparatus #ad - 0-7. 5mm O. D thermometer use it as a syringe port. Capacity of 1000Ml. Made of borosilicate glass.

#ad



Lucksender 2pcs 110*60mm Laboratory Flask Cork Stand Lab Supply Article

#ad
Lucksender #ad - With a compression a cap. With 24/40 inner joint. Can mount vertical or horizontal -- rotates on clamp. 3. 3 borosilicate glass. Extends out approximately 5" from rod, not adjustable. Single neck. Fit with thermometer or tubing. Griffin low form. Round bottom flask. Perfect setup for a lab. Capacity of 1000Ml. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Stainless steel rod 23" length, 045" dia. 10-1. 5 thread. Attaches to rods up to 15 mm in diameter. Astm specification E960, Type I requirements. Made by hand blowing. With 24/40 joint. Made by hand blowing. Made of borosilicate glass. 5 sizes - 50, 100, 250, 500, 1000ml. Extra large marking spot.

#ad



Dow Corning Vacuum Lubricant 5.3oz Tube

#ad
Dow Corning 77472132287 #ad - Perfect setup for a lab. Stainless steel rod 23" length, 045" dia. 10-1. 5 thread. With 24/40 inner joint. Made by hand blowing. Attaches to rods up to 15 mm in diameter. Low vapor pressure, stiff, no melting silicone lubricant maintains its consistency from -40° to +204°C -40° to +400°F. Prevents fogging of delicate lenses.

3. 3 borosilicate glass. Sealing vacuum and pressure systems. Can mount vertical or horizontal -- rotates on clamp. Capacity of 1000Ml. Fit with thermometer or tubing. 5 sizes - 50, 250, 100, 500, 1000ml. Extra large marking spot. Lubricating o-rings in binoculars and telescopes. Made by hand blowing. Made of borosilicate glass.

Dow Corning Vacuum Lubricant 5.3oz Tube #ad - Blue powder coated support stand base 8" x 5. 25". Designed for sealing and lubricating vacuum and pressure systems. With 24/40 joint.

#ad



Laboy ASCS002440S Polyacetal Conical Joint Clips for 24/40 or 24/29 Standard Taper Glass Joint Pack of 10

#ad
Laboy ASCS002440S #ad - With 24/40 inner joint. Made of polyacetal. Astm specification E960, Type I requirements. Used to connect a 24#the largest diameter for the joint is 24mm inner taper joint and a 24# outer taper joint. 5 sizes - 50, 100, 250, 500, 1000ml. Extra large marking spot. Lubricating o-rings in binoculars and telescopes.

Stainless steel rod 23" length, 045" dia. 10-1. 5 thread. Prevents fogging of delicate lenses. Perfect setup for a lab. Made of borosilicate glass. Single neck. Made of polyacetal, withstand temperatures up to 302 ° F 150 ° C, not resistant to the corrosive gases. Made by hand blowing. With 24/40 joint. Seals and lubricates chemical processing equipment.

Laboy ASCS002440S Polyacetal Conical Joint Clips for 24/40 or 24/29 Standard Taper Glass Joint Pack of 10 #ad - For 24/29, 24/40 standard taper joint. Attaches to rods up to 15 mm in diameter. Pack of 10 Not resistant to the corrosive gases.

#ad



YaeCCC Magnetic Stirrer 500ml 0~1400 Revolutions Per Minute Stirring Heating Mantle 250W Magnetic Stirrer Heating

#ad
Yae First Trading Co.,Itd #ad - Temperature: 380℃ 716℉. Round bottom flask. With 24/40 joint. Stainless steel rod 23" length, 045" dia. 10-1. 5 thread. Stirring speed: 0~1400 r/min; the unit has a 2 analog dials for both temperature control and stirrer speed. This magnetic stirring heating mantle with dual stirring and heating, can work continuously up to four hours.

It features alkali-free glass fiber insulation and a nickel-chromium alloy resistance wire in a hemispherical internal heater. The magnetic stirrer is widely applied to colleges, petrochemical industries, medicine, and environment protection institutions for liquid heating and stirring. Withstand temperatures up to 302F 150C.

YaeCCC Magnetic Stirrer 500ml 0~1400 Revolutions Per Minute Stirring Heating Mantle 250W Magnetic Stirrer Heating #ad - In addition, this equipment has the function of magnetic stirring, which makes the liquid is heated equably under the action of stirring. It has the characteristics of large heating area, high temperature evenness, fast warm-up, accurate tem-control, time and cost saving. Lubricating o-rings in binoculars and telescopes.

For 24/29, 24/40 standard taper joint. Fashionable and attractive product, easy to operate with effective use. Perfect setup for a lab. Attaches to rods up to 15 mm in diameter.

#ad



StonyLab Thermometer Inlet Adapter with 24/40 Inner Joint, 80mm Height, for Distillation Apparatus

#ad
StonyLab Scientific #ad - Seals and lubricates chemical processing equipment. Griffin low form. Temperature: 380℃ 716℉. We pack and ship your orders directly from our US-based warehouse within 24 business hours, and tracking information will be provided to you as soon as it's available. Extends out approximately 5" from rod, not adjustable.

We boast excellent customer service with a high satisfaction rating, with our team of representatives ready to assist you Monday to Friday, from 9:30AM to 5:30PM Eastern Time. Includes a compression cap. Borosilicate glass, Heavy Duty Design, Reusable & High quality. 2. Fit with thermometer or tubing. With 24/40 inner joint.

StonyLab Thermometer Inlet Adapter with 24/40 Inner Joint, 80mm Height, for Distillation Apparatus #ad - Made of borosilicate glass. With a compression a cap. Round bottom flask. Blue powder coated support stand base 8" x 5. 25". Stainless steel rod 23" length, 045" dia. 10-1.

#ad